Mobicool P24 DC/AC Notice D'emploi page 10

_P24_P28_S25_DC-AC.book Seite 10 Dienstag, 21. April 2009 2:40 14
Operation
Note
I
If the handle is folded back of if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded for-
wards.
Note
I
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 2 1, page 4) into the cigarette
lighter socket or a 12 V socket in the vehicle
or
➤ Plug the 220-240 V connection cable (fig. 2 2, page 4) into the AC volt-
age socket and connect it to the 220-240 V AC mains supply.
➤ Only on versions with the additional heating feature: Push the switch
(fig. 4 3, page 4) on the control panel to "COLD" or "HOT" to switch on
the cooler.
Note
I
Close the box tightly by pushing down the lid.
✓ The indicators on the control panel show you the operating mode:
Operating display
Green (fig. 4 1, page 4)
Red (fig. 4 2, page 4)
✓ The cooler starts cooling/heating the interior
Caution!
a
Ensure that the objects placed in the cooler are suitable for cooling/
warming to the selected temperature.
➤ If you wish to switch the cooler off:
– Slide the switch (fig. 4 3, page 4) to the "OFF" position (only with the
heating accessory)
– Pull out the connection cable
10
P24 DC/AC, P28 DC/AC, S25 DC/AC
Operating mode
Cooling
Heating