Sony SU-W100 Mode D'emploi page 3

Installation
For secure and safety installation of the product, we recommend that you
consult your Sony dealer or qualified service personnel before you start the
installation.
For the installation, have ready six commercially available mounting screws,
anchor bolts, etc. that are appropriate for the wall.
The type and length of the screws required depend on the material and
strength of the wall. If you do not know which material your wall is made of,
consult your Sony dealer or qualified service personnel.
Step 1: Check the parts
Check all the parts are included in the package.
Bracket A (1)
Step 2: Decide the installation location
Decide the location on the wall to install the TV.
Then, place bracket A on the installation location and mark the four screw
holes on the wall using a pencil.
Before marking, make sure that the distance between the upper edge of bracket
A and the ceiling and that between the side edge of bracket A and the side
wall are 20 cm or more.
20 cm or more
Note
Attach bracket A level with the floor.
Bracket B (1)
Ceiling
Bracket A
20 cm or more
Wall
Screw (2)
Mark this
portion using
a pencil.
continued
GB
3