Sony HT-CT180 Manuel D'instructions page 10

F:\HT-CZ1-11_UC2\4559026111\4559026111HTCT180UC2\01GB-
HTCT180UC2\050BLT.fm
010COV.book Page 10 Tuesday, December 2, 2014 2:44 PM
Listening to music of the
registered device
1
Press (BLUETOOTH).
2
On the BLUETOOTH device, select
"HT-CT180."
3
Make sure that the BLUETOOTH
indicator (blue) lights up.
4
Start playback on the BLUETOOTH
device.
Connecting to a BLUETOOTH
device by One-touch
functions (NFC)
By holding an NFC-compatible
BLUETOOTH device near to the N-Mark
on the system, the system and
BLUETOOTH device proceed to
complete pairing and the BLUETOOTH
connection automatically.
Compatible devices
Smartphones, tablets, and music
players with the NFC function built-in
(OS: Android 2.3.3 or later, excluding
Android 3.x)
1
Download, install, and start the
"NFC Easy Connect" application.
Notes
• The application may not be available
in some countries/regions.
• Depending on your BLUETOOTH
device, this operation may not be
required.
10
GB
2
Touch the N-Mark of the Bar
Speaker with the BLUETOOTH
device.
3
Make sure that the BLUETOOTH
indicator (blue) lights up.
Connection has been established.
Notes
• You can connect only one device at a
time.
• Depending on your device, you may need
to set the NFC function to on beforehand.
Refer to the operating instructions of your
device.
Tip
• If pairing and the BLUETOOTH connection
fail, do the following.
– Relaunch "NFC Easy Connect" and
move the BLUETOOTH device slowly
over the N-Mark.
– Remove the case from the BLUETOOTH
device if using a commercially available
device case.
4-559-026-11(1)
masterpage: Left
HT-CT180