Control Elements; Default Programs - bredent thermopress 400 Manuel D'utilisation Et D'entretien

6.2 Control elements

7. Factory stored programs
The heating time of the unit to 260° C is approx. 10 minutes and to 380° C approx. 20 minutes.
No changes may be performed while a program is running.
The CE key (15) can be used to abort any program which has already been started; the
CE
display returns to the previously selected menu items.
Example based on version 2.62
Program No. Material
*
1 Polyan IC
2 bre.dentan HP
3 bre.flex
4 bre.flex 2nd Edition
5 Bio Dentaplast
6 Bio XS
7 bre.dentan HP
8 Bio Dentaplast
9 Bio XS
10-30 freie Plätze
18
Flask / Set
temperature
Muffle
flask 250 °C
flask 280 °C
flask 222 °C
flask 280 °C
flask 220 °C
flask 380 °C
muffle 280 °C
muffle 220 °C
muffle 380 °C
--- ---
*
CAUTION New processing parameters - Polyan IC
For the currently valid setting parameters, please refer to the Quick Reference Card
*
(REF 009455EX-... version of the Quick Reference Card) supplied with the device.
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany · T: +49 7309 872-441 · F: +49 7309 872-444
www.bredent.com · @: info@bredent.com
Heating Pressure Injection
time time speed
10 min 60 s 6
7 min 60 s 6
15 min 90 s 6
15 min 90 s 6
15 min 120 s 6
20 min 60 s 6
7 min 120 s 2
15 min 240 s 2
20 min 120 s 2
--- --- ---
Position heating cylinder
(17) Heating cylinder lever
(24) Flask chamber lid (protective lid!)
(20) Bracket
(21) Contact switch
(19) Clamping screw 2
(23) Heating cylinder
(01) Main switch with integrated microfuse
(22) Flask chamber
(18) Clamping screw 1
(25) Unit fuse
Force level Flask-/Muffle-
(power) temperature
200 40 °C
145 40 °C
90 40 °C
165 60 °C
80 40 °C
95 150 °C
80 40 °C
60 20 °C
60 150 °C
--- ---