Adjusting The Clutch - Yamaha GRIZZLY 80 2005 Manuel Du Propriétaire

2
1
1. Footboard 2. Screw (×6)
1. Repose-pied gauche 2. Vis (
1. Plataforma para el pie 2. Tornillo (×6)
1. Rubber cap 2. Locknut
1. Bouchon en caoutchouc
2. Contre-écrou 3. Boulon de réglage
1. Tapa de goma 2. Contratuerca
2
3
3. Bolt (×2)
× ×
6) 3. Boulon ( 2)
3. Perno (×2)
q w
e
3. Adjusting bolt
3. Perno de ajuste
EBU15631

Adjusting the clutch

1. Remove the left footboard by removing the
screws and bolts.
2. Remove the rubber cap.
3. Loosen the locknut.
4. Slowly turn the adjusting bolt clockwise
until resistance is felt. Then turn it 1/8
counterclockwise.
5. Tighten the locknut to the specified torque.
Tightening torque:
8 Nm (0.8 m0kgf)
NOTE:
Turn the adjusting bolt clockwise to decrease
the clutch free play and turn it counterclockwise
to increase the free play.
6. Install the rubber cap securely.
8-51