Introduction; Receiving The Product; Warranty - CAMPAGNOLA STAR 40 Manuel D'utilisation Et D'entretien

1 INTRODUCTION

1.1 Functions and use of the use and maintenance manual
Before working on the machine, carefully read and understand this Use & Maintenance Manual in order to
safe-guard the operator and to avoid damaging the machine. These instructions describe how to operate the
product safely, economically and in compliance with the current safety regulations. Following these
instructions helps avoid dangerous situations, reduces repair costs and down-time of the product and
extends the life-span of the product itself. This manual must be intact and legible in its entirety. Every
operator involved in using the product or in charge of maintenance must know the location and be able to
read it whenever needed.
1.2 Symbolism and qualification of operators
All man-machine operations herein described must be performed by personnel defined in compliance with
the manufacturer's manual. Each procedure is accompanied by a pictogram which indicates the operator
considered most suitable for the tasks to be performed. The indication to identify the personnel qualifications
are given below.
Operators
Personnel who can install, operate, adjust, clean, transport the machine and carry out its routine
maintenance.
Mechanical maintainers
Mechanical personnel with specific skills, able to perform installation, extraordinary maintenance and/or
repairs indicated in this manual.
AUTHORISED WORKSHOP
Is the workshop authorised to carry out repairs on CAMPAGNOLA machines.
WARNING!
Precautions to be taken in order to safeguard the operators and bystanders in the work area.
IMPORTANT!
Note to be taken in order to avoid problems with the product or to operate in compliance with the
current safety regulations.
1.3 Declaration of conformity
Every machine destined to countries included in the European Union (EU) is supplied with adequate
characteristics to the requirements of the Machinery Directive 2006/42/EC. Its manufacturer's Declaration of
conformity is enclosed in the use and maintenance manual.
1.4

Receiving the product

When receiving the product, make sure that:
• it has not been damaged during transportation;
• the supply matches the order (see "Product description" - chap. "Technical specifications").
• If problems arise please contact the manufacturer's Service Department quoting all details indicated
on the nameplate (refer to "Product Identification" - chap. "Technical specifications").
1.5

Warranty

As to the product warranty, please refer to the enclosed "Warranty certificate".
WARNING!
For warranty claims, according to the above mentioned points, the product to be repaired must always be
accompanied by the properly filled-in warranty card and the corresponding proof of purchase with date of
purchase (invoice or any other document with legal value).
Page 20 Use and Maintenance Manual – Original Instructions
Rev.: 00, Date 01/01/2017