Troubleshooting; Improper Uses; Tool Transport; Maintenance - CAMPAGNOLA STAR 40 Manuel D'utilisation Et D'entretien

5.3

Troubleshooting

FAULT
The shear does not work
The shear has no power
When pulling the operating lever, air
comes out
NOTE: If the above-mentioned remedies do not solve the problem, contact an Authorised Service
Point.
5.4

Improper uses

- Never use the tool when your balance is unstable.
- Never cut materials being other than wood.
- Never use the tool as a lever or for lifting, moving or breaking any objects.
- Never use the tool if the atmosphere is explosive or inflammable.
5.5

Tool transport

Disconnect the tool from the air supply before carrying it. In case of long transports keep the tool in its
packaging.
WARNING!
Use the tool only for the purposes described in par. "Product description". Any other use may cause
injuries.

6 MAINTENANCE

6.1

Routine maintenance

WARNING!
Before carrying out any maintenance operation, disconnect the tool from the compressed air hose.
All the maintenance operations which are not described in this manual have to be performed by a
CAMPAGNOLA S.r.l. Authorised Service Point.
The routine maintenance operations may be carried out by the operators.
6.1.1

General information

Before any maintenance operation:
• Disconnect the air hose.
• Wear heavy-duty protective gloves.
WARNING!
•
Do not use hydraulic oil or brake fluid. These may cause irreparable damages to the
equipment.
•
Periodically check the oil level in the compressor lubricator.
Page 26
REMEDY
• Check the air compressor for proper functioning (read
the corresponding documentation).
• Check the air supply (see par. 4.1).
• Check the air hose for cleanness (see par. 4.1).
• Check the blade pin is not too tight.
• Check the compressor air pressure.
• Check the extension pole grip seal wear and tear.
Use and Maintenance Manual – Original Instructions
Rev.: 00, Date 01/01/2017