Publicité
Les langues disponibles
Les langues disponibles
Technical Data
Angle Grinder
Art. No
Battery voltage
No-load speed
d= hole diameter
b= Grinding disk thickness max.
D= Grinding surface diameter max.
Thread of work spindle
Weight without battery/Charging equipment
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to EN 60745; Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 60745:
Surface grinding: Vibration emission value a
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 18 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
h, AG
on refer please to our customer center
Specified Conditions Of Use
The angle grinder is used for grinding metal, stone
and ceramic materials, as well as for sanding.
Please refer to the instructions supplied by the acces-
sory manufacturer.
The machine is suitable only for working without
water.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
ENGLISCH
WS 20-201-401-35
58818
20 V
10000 min
-1
22,23 mm
6,3 mm
125 mm
M10
1,82 kg
-18°C ... +40°C
AP 20-20, AP 20-40
LG 20-24, LG 20-35
85,06 dB(A)
96,06 dB(A)
6,15 m/s²
15
Publicité
