Gima CARDIOPOCKET ECG Notice D'utilisation page 71

71
1 When the case is being printed in the 1x12, 1x12+1, 2x6, 2x6+1, 3x4 mode,
if there is no SD card, the dialog box as Fig.13-11-1 will appear to prompt
users the case can't be stored if print continues.
Click "Yes", print will continue but the case will not be stored. Click "No",
print will be canceled, you can insert SD card then continue to print.
2 If you select "Only store" mode, when there is no SD card or SD card
operating error, the prompt as Fig.13-11-2 will appear to prompt users
that store is disabled because of SD card error.
Here click "OK" and insert SD card again, then continue to store case.
3 When system enters Archive Management, the prompt as Fig.13-11-3
appears, please insert SD card again.
ENGLISH
Fig. 13-11-1
Fig. 13-11-2
Fig. 13-11-3