paper speed, filter state, etc.
4.3 In auto mode, one button operation to complete record, which will
improve work efficiency.
4.4 Key-press and touch-screen control, more convenient for operation.
TFT screen shows the working status, more clear for observation.
4.5 Safety Class: Class I, Type CF applied part with defibrillation protection.
4.6 The power supply includes both AC and DC. This device includes built-in
lithium polymer rechargeable battery.
4.7 This instrument can record 450 pieces of ECG waveform and print for 4
hours continually under the best DC state.
4.8 This device can print or store different time length of case to convenient
for doctor's case review and statistics.
4.9 You can select print mode, print length, gain, paper speed and report
print selection.
4.10 You can select whether to set patient information and to save case when
printing.
4.11 You can replay the stored case and patient information anytime.
4.12 Exterior SD card, convenient for use. With SD card, the device can store
100 case most.
4.13 With USB2.0 port, working mode can be selected freely between store
and synchronization.
4.14 In the process of use, there are clear prompts (such as paper-lack,
SD card operating error, etc.) for misoperation, which is convenient
for users' operation.
4.15 Digital signal processing, to obtain the ECG of higher quality by AC,
DFT and EMG filter.
4.16 Auto-measurement, auto-analyse and auto-diagnosis of regular ECG
parameter, reduce doctor's burden and improve working efficiency.
4.17 The figure of whole device is elegant, gliding, smart and portable,
the weight of device is less than 1kg.
4.18 Classification according to the defense degree of deleterious fluid: IPX0.
4.19 Classification according to the safe degree of the device used under
the condition with flammable anaesthesia gas mixed with air (or oxygen,
nitrous oxide): unsuited to use.
4.20 Working mode classification: continuous working device.
4.21 Explanation of some symbols in this device:
PATIENT
ENGLISH
Lead socket
Filter quick set
Refer to instruction manual/booklet
State of USB connection
46