Switching Between Automatic Mode And Manual Mode; Reset - Renkforce MH-3202 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

d) Switching between Automatic Mode and Manual Mode
The room thermostat must be in the regular display instead of setting mode.
Briefly push the button "
• Symbol "
" = Automatic mode
• Symbol "
" = Manual mode
The room thermostat then performs the settings programmed in the respective mode.
e) Reset
To reset the room thermostat, briefly push the recessed button "RESET" (9). This resets
all settings to the basic data. The time is reset to "12:00 PM" as well.
The following starting times and temperatures are pre-programmed:
• "
" = Starting time 06:00 AM, temperature 22 °C
• "
" = Starting time 08:00 AM, temperature 16 °C
• "
" = Starting time 04:00 PM, temperature 22 °C
• " " = Starting time 10:00 PM, temperature 16 °C
" (14), to switch between the two modes:
43

Publicité

Table des Matières
loading

Table des Matières