Programming For Time Mode - Renkforce MH-3202 Notice D'emploi

c) Programming for Time Mode
• If programming mode has not been started yet (see chapter 8. a), push the button
" " (15) briefly first. The two symbols " " (8) and "
Then use the buttons "
" " (11) must flash.
• Confirm the selection with the button "
in the top-most line (1 = Monday......7 = Sunday).
• Set the weekday with the buttons "
• Confirm the setting with the button "
• Set the hours of the time with the buttons "
• Confirm the setting with the button "
• Set the minutes of the time with the buttons "
• Confirm the setting with the button "
" (14) and " " (16) to select time setting mode; the symbol
" (15). A number for the week day will flash
" (14) and "
" (15). The hours of the time will then flash.
" (15). The minutes of the time will then flash.
" (15). The setting mode is then terminated.
" (11) will flash in the display.
" (16).
" (14) and " " (16).
" (14) and " " (16).
37