Renkforce MH-3202 Notice D'emploi page 40

Step 4: Select starting time and temperature for "
• If the temperature or the starting time is to be changed, push the button
" " (15) again. In the upper left of the display, the value for the temperature setting
flashes now.
• Set the desired temperature with the buttons "
• Confirm the setting with the button "
onward the set temperature applies flash then.
• Set the hours with the buttons "
• Confirm the setting with the button "
which onward the set temperature applies flash then.
• Set the minutes with the buttons "
• Confirm your selection with the button "
Step 5: Select starting time and temperature for "
• If the temperature or the starting time is to be changed, push the button
" " (15) again. In the upper left of the display, the value for the temperature setting
flashes now.
• Set the desired temperature with the buttons "
• Confirm the setting with the button "
onward the set temperature applies flash then.
• Set the hours with the buttons "
• Confirm the setting with the button "
which onward the set temperature applies flash then.
• Set the minutes with the buttons "
• Confirm your selection with the button "
40
" (5)
" (14) and "
" (15), the hours of the starting time from which
" (14) and " " (16).
" (15), the minutes of the starting time from
" (14) and " " (16).
" (15). The symbol "
" (6)
" (14) and "
" (15), the hours of the starting time from which
" (14) and " " (16).
" (15), the minutes of the starting time from
" (14) and " " (16).
" (15). The symbol " " (7) will then flash.
" (16).
" (6) will then flash.
" (16).