Beeper MP-250HUD-B Manuel D'installation Et D'utilisation page 19

5. UTILISATION
•
First alert level
Press 4 times the "MENU" button on the HUD and the icon
button, then press
km / h must be less than the warning "Speeding".
When you reach the speed you have chosen, the icon
MENU SET
•Second alert level
Press 5 times the "MENU" button on the HUD and the icon
press or to adjust the speed you have chosen as a speeding ticket. It can be between 40 and 195km / h and must be higher
than the warning "Caution".
When you reach the speed you have chosen, the icon
•
Icone test
To verify that your monitor is working properly, press the "SET" button for 3 seconds, all the icons will
light up one after the other. The test mode automatically stops after 20 seconds. To manually exit,
Press "MENU" or "SET".
MENU SET
or to adjust the speed you have chosen as the limit of speeding. It must be between 40 and 100
will turn red. To start the adjustment, press the "SET" button, then
will turn red and beep twice
19
will turn yellow. To start the adjustment, press the "SET"
will turn yellow and beep once
MENU SET