Setting Up Web Access - Harvia SENTIO pronet Instructions D'installation Et Mode D'emploi

Instructions for installation and use

5.3. Setting up WEB access

Once your web server has been integrated into a network that provides access
to the Internet, the Internet can be used to access your sauna control unit from
anywhere in the world. Prerequisite for this is a PC, smartphone, tablet, etc. that
is also connected to the Internet.
The following Internet address is used to access the log-in page for your web
server:
The next step involves entering the online ID of your web server and the password
for the server. The default server password is sentiotec.
The online ID can be found on the sticker affixed to the back of the web
server, or can be called up locally via System Settings > Version Information.
To prevent misuse, you should change the password after logging in for
the first time. This is only possible using local access. See 8.4. System
settings on page 22.
► If a connection was set up successfully, the main window of the web app
opens. Continue with item 8. Operation on page 18.
► If can take a few minutes until your pronet web server has connected to
the VPN server and can be reached.
http://pronet.sentiotec.com
p. 14/26