Topcom BPM ARM 3301 Manuel D'utilisateur page 10

TOPCOM BPM Arm 3301
12 Time adjustment
13 Technical specifications
Model
Power source
Measurement zone
Accuracy
Pressure sensor
Inflation
Deflation
Memory capacity
Auto-shut-off
Operation environment
Storage environment
Weight
Cuff Arm circumference
Limited patient
Classification
*Specifications are subject to change without notice.
10
To adjust the date an time:
• Press the SET button to activate the display. The memory
zone will be displayed.
• Press the MODE button, the month will blink on the
display.
• Press the SET button succesively to change the month.
• Press the MODE button to confirm the month. The day
will blink on the display.
• Change the day, hours and minutes as described above,
using the SET button to change and the MODE button to
confirm every setting.
• After setting the minutes, the device is ready to use.
BPM Arm 3301
6V DC: 4 x AA - Alkaline batteries
Pressure: 0~300 mmHg
Pulse: 40~199 beats/minute
Pressure: ±3 mmHg
Pulse: within ±5% of reading
Semi-conductor
Automatic - Pump driven
Automatic Pressure release valve
3 Memory zones for each 30 memories
1 minute after last key operation
+10°C~+40°C
<85% RH max.
-20°C~+70°C
<85% RH max.
265g (with batteries)
23~33 cm / 9~13 in
Over 18 years old
• Internally powered equipment
• Classification of type BF
• IPX0
• Not suitable for use in presence of flammable
anaesthetic mixture with air or with oxygen or
nitrous oxide
• Continuous operation with short-time loading