Cleaning The Kettle; Cleaning Method - SOLIS 558 Mode D'emploi

CLEANING THE KETTLE

To ensure that you can enjoy your DIGITAL KETTLE for as long as possible, please remove any limescale
deposits on a regular basis.
Always pull the plug out of the mains supply to clean the kettle and allow the appliance to cool completely.
Do not use chemicals or steel wool or abrasives to clean the kettle in case they scratch the surface and
fade the colour.

Cleaning method

1. Use SOLIPOL to clean the water jug on a regular basis. Advice about the dose and application period
is provided on the bottle. SOLIPOL is available from good specialist retailers or from Solis-Mail AG,
Tel: 0848 804 884, Fax: 0848 804 890, www.solis-shop.ch (delivery within Switzerland only).
2. Empty the kettle. Remove any remaining residue with a soft cloth.
3. Fill the kettle with clean water and boil. After repeating this step once more,
the kettle will be ready to use.
4. If necessary, repeat the steps described above several times.
5. Use a damp cloth to clean the surface then rub the kettle off with a dry cloth.
6. Hold the top edge of the filter, press downwards lightly and pull the filter out.
Wash with clean water and replace inside the kettle.
Solis_DigitalKettle-Betriebsanleitung.indd 31
31
16.02.11 18:01