SOLIS 683 Mode D'emploi page 48

L E D D I S P L AY
• The LED display shows the current room temperature and the selected mode (LO,
HI or AUTO). Note: While programming the operation time (TIMER) or tempe-
rature (TEMP), these two settings will flash. Once the timer is set, the clock sym-
bol will light up as well.
T U R N I N G O F F T H E A P P L I A N C E
• If you want to deactivate the appliance, press the ON/OFF button first and then
turn the power switch to the position „0". After that, pull the power plug from
the power socket.
▲
C L E A N I N G
• Disconnect the appliance from the mains before each cleaning. Let it cool down
completely.
• Clean the cooled down appliance with a slightly wet cloth.
• Please keep pointed and sharp objects away from the appliance to prevent da-
mage.
• Never use abrasive or aggressive cleaners, also, do not use acetone or alcohol.
• Never bring the heater into contact with water and never submerge the heater
in water.
• Occasionally, clean the grids of the air inlet and outlet openings on the top and
bottom of the appliance. To do this, use a vacuum cleaner in its lowest setting.
▲
T E C H N I C A L S P E C I F I C AT I O N S
Model-No.
Product description
Voltage/Frequency
Output
Specifications (W x H x D)
Weight
48
HC15-14AR, type 683
convection heater
220-240V - / 50/60 Hz
1.500 watt
approx. 75 x 45 x 8,5 cm
(without feet or wall mount)
approx. 7,5 kg (without feet or wall mount)