SOLIS 683 Mode D'emploi page 45

Step 2: Fixing the wall mount to the wall
• Mount the wall mount to the wall by screwing the four screws (provided)
through the four bores in the vertical mounting bars into the wall (2 per bar). If
needed, use a spirit level to rightly fix the mount to the wall.
Step 3: Fixing the heater to the wall mount
• Lift the heater in an upright position and push the two lower slots on the ap-
pliance backside onto the two lower holding struts. Then, slightly push the hea-
ter downwards to fasten the holding struts to the appliance.
• Then, push the two upper slots on the appliance backside onto the upper hol-
ding struts of the wall mount and secure the wall mounting by screwing the small
screws into the two upper holding struts, using a screwdriver.
F O R S TAT I O N A RY U S E
• If you want to use the heater standing on the two feet with two wheels each,
first unscrew the two wing screws on the lower appliance backside. Push the feet
onto the metal part, both bores have to align. Fix the feet by screwing the two
screws through the foot into the appliance. Fasten the screws until the heater
stands upright on the feet, resp. the floor.
E L E C T R I C C O N N E C T I O N
• Connect the appliance to a wall socket with an alternating current of 220-240V
/ 50-60Hz.
• When mounting the appliance to the wall, the electric connection has to be in-
stalled by a professional, unless you use a nearby wall socket to which the power
plug can be connected.
Foot with two wheels each
Screws
45