SOLIS 683 Mode D'emploi page 46

▲
S TA R T I N G U P
• Connect the power plug to a suitable power outlet.
• Turn on the appliance using the power switch (Position I).
• The LED display will state the current room temperature, the appliance is in
standby mode. You can now operate the appliance, using the function buttons
on the appliance or on the remote control.
T H E F U N C T I O N B U T T O N S O N T H E S I L E N T H E AT E R A N D T H E
R E M O T E C O N T R O L
1. ON/OFF button
• Use this button to switch the appliance on and off. Only after pressing this but-
ton you can operate the following buttons. The heating function „LO" will light
up in the display.
2. MODE button
Use this button to set the heating function. Each press of the but-
ton will take you to the next mode.
• LO – In LO mode, low heating power is selected,
the display will state LO for „low".
• HI – In HI mode, max. heating power is selected,
the display will state HI for „high".
• AUTO – In AUTO mode, automatic heating power is se-
lected. That means, the appliance will heat until the room
temperature set by you is reached, then, it will automatically
switch off. If the room temperature drops below the set va-
lue, the appliance will automatically restart. The display will
state AUTO.
Caution : In AUTO mode, you have to set the desired tem-
perature using the TEMP button.
3. TEMP button
• Caution : You can only set the temperature in AUTO mode.
• You can choose a room temperature between 5°C and 35°C.
At the max. temperature of 35°C, the appliance will heat permanently.
• Press the TEMP button (or hold it), until the desired temperature lights up on the
display. When you stop pressing the TEMP button, the set temperature will flash
46
4 3
1 2
Power switch
(only on appliance)