How To Set The Timeout Lock In Admin Mode - iStorage DATAshur 2 personal Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

19. How to set the Timeout Lock in Admin mode

To protect against unauthorised access when the datAshur Personal
Personal
can be set to automatically lock after a pre-set amount of time.
2
In its default state, the datAshur Personal
activate (lock) anywhere between 1 and 99 minutes. Admin Timeout Lock settings will override User settings.
To set the Timeout Lock please follow steps in the table below.
Caution:
Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 12.
Instructions
1. Unlock the datAshur Personal
2. Press the KEY button 3 times
(treble click)
3. Within 10 seconds begin to press button number 8
(Tuv) followed by the number 5 (jkL) button - (85)
4. Press KEY button once
5. Within 10 seconds begin to enter the length of User
Timeout in 2 digits:
00 = 0 minutes (default)
01 = 1 minute
99 = 99 minutes etc
6. Press the Key button once
#16
Timeout Lock feature is turned off. The Timeout Lock feature can be set to
2
with Admin PIN
2
www.istorage-uk.com
www.istorage-uk.com
is connected to a host and unattended, the datAshur
2
LED
LED State
Red
solid LED followed by a flickering
LED indicating successful Admin PIN entry
Green
and
Blue
&
awaiting new instructions in OPTIONS mode.
Green
and
Blue
&
together
Blinking
Green
Green
LED continues to blink
Red
solid LED changing to flickering
LED. Admin can override USER Lock Timeout
Green
LED's flicker together
LED's continue to flicker
LED
Green
#16

Publicité

Table des Matières
loading

Table des Matières