Optional Accessories; Exploded Drawing And Spare Parts List - Mafell DSS 300 cc Notice D'emploi

Defect
Saw wire is running out or
increased effort necessary during
advancing
Chip ejection blocked
Saw chain is coasting a long time
after it has been switched off
8

Optional accessories

- Saw table ST 1700 Vario
- High volume vacuum cleaner S 200
- Machine holder DSS-MH
- Clamping device F-FIX
- Saw wire + scraper DSS-SR
- Double-toothed belt DSS-DZ
- Guide rail F80, 800 mm (31.496 in.) long
- Guide rail F110, 1100 mm (43.307 in.) long
- Guide rail F160, 1600 mm (62.992 in.) long
- Guide rail F210, 2100 mm (82.677 in.) long
- Guide rail F310, 3100 mm (122.047 in.) long
- Sliding bevel F-WA
- Accessories for guide rail:
Screw clamp F-SZ100MM (2 x)
-
Connecting piece F-VS
-
Rail bag F160
-
- Rail bag kit F80/160 with sliding bevel consisting of: F80 + F160 +
connecting piece + sliding bevel + 2 screw clamps + rail bag
- Rail bag kit F160/160 consisting of: 2 x F160 + connecting piece + 2
screw clamps + rail bag
- Roller edge guide UA
- Parallel stop
9

Exploded drawing and spare parts list

The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Cause
Blunt saw wire
Feed rate too fast
No extraction system connected
Automatic brake defective
-29-
Elimination
Release the switch immediately.
Remove the machine from the
workpiece and replace the saw
wire
Reduce feed speed
Take the machine to a MAFELL
customer service shop
Order No. 91A 601
Order No. 91A 301
Order No. 207 164
Order No. 206 760
Order No. 206 370
Order No. 206 371
Order No. 204 380
Order No. 204 381
Order No. 204 365
Order No. 204 382
Order No. 204 383
Order No. 205 357
Order No. 205 399
Order No. 204 363
Order No. 204 626
Order No. 204 749
Order No. 204 805
Order No. 205 323
Order No. 205 166