Applications; Setting The Meter Into Operation - Monacor DMT-2050 Mode D'emploi

GB

3 Applications

This digital multimeter serves for
measuring DC and AC voltages up to
600 V and resistances. Furthermore,
it is possible to measure the forward
voltage of diodes. A buzzer is inte-
grated for checking continuity.
4 Setting the Meter into
1) For transport, the test leads are
2) Set the orange sliding switch (5)
16
Dead batteries do not
belong in the household
rubbish;
them to a special waste
disposal (e. g. collecting
container at your retailer).
Operation
accommodated in the housing. To
take them out, open the rear shell
of the housing (fig. 3). To obtain a
good reading position, it is pos-
sible to set up the meter. For this
purpose, the rear shell of the
housing serves as a stand.
to the position of the desired
measuring function. A reading will
appear on the display (1). If it fails
to appear, insert two 1.5 V button
cells (LR-44). If the symbol
always take
is