Monacor DMT-2050 Mode D'emploi page 17

displayed, replace the batteries –
see chapter 6 "Replacing the Bat-
teries".
3) Always switch off the meter after
operation with the sliding switch
(position OFF).
The meter is automatically
switched off after approx. 8 min-
utes. Before it is switched off,
short audio signals will sound;
when it is switched off, there will
be a longer audio signal. To
switch it on again, actuate the
sliding switch.
5 Measurements
WARNING Measurements in cir-
to take the required safety precau-
tions. In case of measurements
with a hazard of contact, avoid
working on your own. Ask a second
person to assist.
Prior to selecting another measuring
function, remove the test prods from
the test object to prevent damage to
the meter.
cuits carrying more
than 42 V must only
be made by persons
able to recognize a
hazard of contact and
GB
17