Safety Notes; Applications - Monacor DMT-1005 Mode D'emploi

2 Safety Notes

This appliance corresponds to the directive
for electromagnetic compatibility 89/336/
EEC and
73/23/EEC.
With this unit very lethal high voltages can
be measured. Be especially careful with
voltage measurements above 42 V. The
test leads must always be perfectly insula-
ted. Damaged test leads must be replaced.
For operation also observe in any case the
following:
The unit is only suitable for indoor use.
Protect the unit from humidity and heat
(permissible ambient temperature range
0–40 °C).
If the unit is used for purposes other than
originally intended, if it is overloaded or
operated, connected or repaired in the
wrong way, there is no liability for possible
damage.
Only use a dry, soft cloth for cleaning, by
no means chemicals or water.
If the unit is to be put out of operation defin-
itively, bring it to a local recycling plant for
disposal.

3 Applications

This digital multimeter serves for measuring
DC and AC voltages, DC currents as well as
resistances. Furthermore, the forward volt-
age of diodes and the current amplification of
transistors (hFE) can be measured.
the low voltage directive
GB
13