Num'axes Canicom 250S Guide D'utilisation page 25

CANICOM 250S_Indice A_CANICOM 200 18/01/2021 11:51 Page25
Maintenance
If the problem persists, contact your distributor or check out on www.numaxes.com.
- Avoid cleaning the unit with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and
You can also contact NUM'AXES at +33.2.38.69.96.27 or by Email export@numaxes.com.
neutral detergent.
- In order to maintain water tightness, we recommend the replacement of the seal located in the receiver
collar every year.
Troubleshooting
Should your CANICOM 250S stop working or develop a fault, first read this user's guide over, then check
the batteries and replace them if necessary and retry. Also check that you are using the product correctly.
If you encounter any problem, re-code the collar with the remote control (ref. coding procedure).
Re-initialise the system by removing the battery from its housing, then with a metallic tool (e.g.
screwdriver, scissors) touch each of the 2 battery contacts for 2 seconds approximately (ref. Diagram 7).
Insert the battery again: One beep is emitted, indicating the battery is in correct position.
Restart your CANICOM using the remote control.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
For all repairs, please supply the following:
- the complete product
- the proof of purchase (invoice or sales receipt)
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs
incurred.
Diagram 7
Gb - 25
Reset: connect
the 2 supports of
the battery