WAGNER W 550 Mode D'emploi page 20

GB
Max. viscosity
Power source
Power consumption
Atomizing output:
Double insulation
Sound pressure level
Oscillation level
Weight
1) Air Cap
3) Union nut
5) Trigger guard
7) Material volume adjustment
9) Mains lead
11) Ventilating hose
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Wall paints (emulsion paints) etc., alkali and acidic paints. Coating materials with a flash
point below 21°C.
Preparation of the Coating Material
The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer ( Internet download).
1. Stir the material up and put the required amount into the paint container.
Sprayed material
Glazes
Wood preservatives, mordants, oils,
disinfection agents, plant protective agents
Paints containing solvents and water-soluble
paints, primers, vehicle coating paints,
thick-film glazes
2. If the convey capacity is too low, add 5 - 10% dilution step-by-step until the convey
capacity fulfils your requirements.
14
Technical Data
90 DIN-s
230 - 240 V
~
280 W
65 W
74 dB (A)
< 2,5 m/s
1,3 kg
Description (Abb. 1)
Thinning recommendation
TechnDat_GB
2) Nozzle
4) Spray gun front part
6) Spray gun rear part
8) Air filter cover
10) Container
12) Valve
undiluted
undiluted
dilute by 5 - 10%
W 550
Beschreibung_GB
Visko