Storch VacTec 652500 Traduction Des Instructions D'origine page 116

Working with electrical power tools
Only for appliances with built-in
socket:
DANGER
Risk of injury and damage! The socket
outlet is only for the connection of
power tools to the vacuum cleaner.
Any other use of the socket outlet is
not permitted.
Connect the mains plug of the electric
power tool to the vacuum cleaner.
The vacuum cleaner is in standby
mode.
Switch on the appliance at the rota-
ting knob.
NOTE
The vacuum cleaner is turned on and
off automatically with the electric
power tool.
NOTE
The vacuum cleaner starts automati-
cally within 0.5 seconds and continu-
es to run for 15 seconds after the
power tool has being switched off.
Translation of the original instruction
NOTE
Please refer to „Technical specifica-
tions" for the power connection speci-
fications of the power tools.
I
Remove the elbow from the suction
hose.
Attach the tool adapter to the suction
hose.
Connect the tool adapter to the
electric power tool.
Automatic filter cleaning
The appliance has an special filter
cleaning system that is particularly
effective with fine dust. The flat ple-
ated filter is automatically cleaned
every 7.5 / 15 / 60 seconds (depen-
ding on the application) through an air
jet (pulsating sound).
116