Operation - Storch VacTec 652500 Traduction Des Instructions D'origine

General
If wet dirt is vacuumed with the
upholstery or crevice nozzle, or if
water is sucked up from a container,
it is recommended to deactivate the
„automatic filter cleaning" function.
If the maximum liquid level is rea-
ched the appliance will turn off auto-
matically.
In case of non-conductive liquids
(such as emulsion drilling fluids, oils,
and greases) the appliance is not tur-
ned off when the container is full.
The filling level must be continuously
monitored and the container must be
emptied in time.
After the wet vacuuming: Clean the
flat folded filter with the filter cle-
aning. Clean the electrodes with a
brush. Clean the container with a
damp rag and dry it.

Operation

Rotating knob
0
Appliance OFF
1
Appliance ON
Automatic filter cleaning:
OFF
2
Appliance ON
Automatic filter cleaning:
AUTO
maximum interval
MAX
3
Appliance ON
Automatic filter cleaning:
AUTO
minimum interval
MIN
Clip connection
The suction hose is equipped with
a clip system. All accessories with a
nominal width of 35 mm can be con-
nected.
Turning on the Appliance
Plug in the mains plug.
Set the rotary switch to the desired
program.
Adjusting the suction power
Set suction power (min-max) at the
rotary control
115 Translation of the original instruction