Storch VacTec 652500 Traduction Des Instructions D'origine page 113

Release and remove the suction head.
Insert the disposal bag.
Pull disposal bag over the container.
Make sure that the marking line is
situated within the container and both
ventilation holes are positioned at the
back of the container.
Insert and lock the suction head.
Changeover from wet to dry vacuum
cleaning
Applicable only for flat fold filter (Cel-
lulose):
ATTENTION
Please note the following when swit-
ching from wet to dry vacuum clea-
ning: If you vacuum dry dust while
the filter element is still wet the filter
will become obstructed and may be
damaged beyond repair.
Replace wet filter with a dry one prior
to use.
Change the filter according to instruc-
tions under the section „Maintenance
and Care".
Note: For permanent wet vacuum cle-
aning it is advisable to use a PES flat
pleated filter (see filter systems).
Wet vacuum cleaning
DANGER
No dusts hazardous to health should
be sucked in during wet vacuuming.
Inserting the rubber lips
Remove the brush strips.
Install the rubber lips.
113 Translation of the original instruction