Rittal CMC III Notice D'installation Et D'utilisation page 9

5.3 Settings
The following parameters can be set or viewed at the CMC III PU web site:
– Value X: Acceleration in the X direction [g]
– Value Y: Acceleration in the Y direction [g]
– Value Z: Acceleration in the Z direction [g]
– SetPtAlarm: Upper alarm limit value [g]
– Status: Current status of the vandalism sensor
To determine whether any software updates are required: see www.rittal.com or contact Rittal Service
(see section 6).
6 Service
For technical questions, please contact:
Tel.: +49(0)2772 505-9052
E-mail: info@rittal.de
Homepage: www.rittal.com
For complaints or service requests, please contact:
Tel.: +49(0)2772 505-1855
E-mail: service@rittal.de
Rittal CMC III Vandalism Sensor
Installation and operation, Service
EN
9