Sony DSR-PD150 Mode D'emploi page 12

Changing or resetting the setup
Resetting the entire setup for the auto logo insert function
This procedure resets the entire setup for LOGO INS.
(1) Follow steps 1 to 6 on page 6.
(2) Turn the SEL/PUSH EXEC dial to select PASSWORD, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CHANGE, then press the dial.
(4) Enter "CLEARALL," and turn the SEL/PUSH EXEC dial to select EXECUTE,
1
MEMORY MIX
1
MENU
To cancel resetting
Select CANCEL in step 3, then press the SEL/PUSH EXEC dial.
12
then press the dial. "CLEARED" is indicated on the screen, and the entire
setup will be reset.
2-4
1
POWER
SETUP MENU
CLOCK SET
LTR S I ZE
LOGO I NS CLEARED
RETURN
[ MENU ] : END