Matrix BMS 1400-3 Traduction De La Notice Originale page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 61
Notes on Safety and Warnings
Read the manual before
operation!
Watch out for particles hurled in
the cutting direction!
Make sure a minimum distance
of 15 m is kept between machine
and other persons during
15 m
operation!
Wear approved ear protection,
safety halmet, and safety goggles!
Wear skid-proof and sturdy shoes!
Wear high-quality and heavy-duty
gloves!
Wear high-quality and heavy-duty
working clothes!
Exhaust emitted is poisonous and
has a suffocating effect!
Caution Risk of fire!
Gasoline and gasoline vapors are
highly flammable!
Always use breathing apparatus
when machining materials which
generate dust.
Noise emission complies with
Directive 2000/14/EC!
114
Important. Hot parts. Keep your
distance.
Do not use saw blades with this
device!
During cold start, set the choke
lever to , close the choke.
In a warm start, set the choke lever
to , open the choke.
Dear Customer,
Congratulations for the purchase of your
petrol brush cutter.
Carefully read this manual before you
start operating the engine.
Improper use may cause damage to
persons and property.
Persons not familiar with this manual are not
permitted to operate the tool. Keep this manual
at a safe location.
Children and teenagers younger the age of 16 are
not permitted to use the tool. Teenagers older
than age of 16 and working under supervision of
a trained person are permitted to use the tool.
Proper Use
Depending on the attached cutting tool, the
petrol brush cutter is intended to trim lawns or
grass, to cut brushwood, shrubbery, bushes, and
small trees in private areas.
This tool shall not be used for any other purpose.
The manufacturer is not liable for any improper
use, or for any modifications of the engine.
Observe the notes on safety, the assembly and
operation instructions, and in addition to that
prevailing accident prevention regulations.
GB
23

Publicité

Table des Matières
loading

Produits Connexes pour Matrix BMS 1400-3

Ce manuel est également adapté pour:

310.750.230

Table des Matières