Specifications - Sharp 8M-B32C1 Manuel D'installation

3. Pull out the stand from the monitor.
Model
Power requirement
Operating temperature *
Operating humidity
Power consumption (Maximum)
Dimensions (excluding protrusions)
Weight
* Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior
notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
4. Install the provided stand mounting part covers to the
holes where the stand was attached to.
Install the covers so that their tabs are on the right side.
Stand mounting part cover
nInstalling the stand
Assemble in the opposite order of the removal.

Specifications

8M-B32C1
AC 100 V - 240 V, 2.9 A, 50/60 Hz
41°F to 95°F (5°C to 35°C)
20% to 80% (no condensation)
260 W
inch (mm) With the stand
Approx. 29-9/16 (W) x 10-1/4 (D) x 21-1/4 (H) (751 x 260 x 540)
Without the stand
Approx. 29-9/16 (W) x 3-7/8 (D) x 18-7/16 (H) (751 x 99 x 469)
lbs. (kg) Approx. 29.4 (13.3) (monitor only)
Approx. 42.4 (19.2) (with the stand attached)
MOUNTING PRECAUTIONS
1
2
tab
5
E