Specifications - Sharp LL-T2015 Mode D'emploi

Product specifications
Model name
LL-T2015-H (Ivory)/LL-T2015-B (Black)
LCD display
51 cm measured diagonally TFT LCD module
Resolution (max.)
UXGA 1600 x 1200 pixels
Displayable colors (max.)
Approx. 16.77 million colors (8 bit)
Brightness (max.)
250 cd/m
2
Dot pitch
0.255(H) x 0.255(V) mm
Contrast ratio
400:1
Angle of visibility
Left-right 176°; Up-down 176°
>
(contrast ratio 10)
=
Screen display size
Horizontal 408 mm x Vertical 306 mm
Video signal
Analog: Analog RGB (0.7 Vp-p) [75
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital scaling
Enlarging VGA/SVGA/XGA/SXGA etc. with a
compensation process. (no enlarging, based on a
fixed aspect ratio, and enlarging to full screen
size.)
Plug & Play
VESA DDC2B compatible
Power management
VESA: based on DPMS
DVI: based on DMPM
Input signal terminal
Analog: 15 pin mini D-sub (3 rows)
Digital/Analog: 29 pin DVI-I
Height adjustment
Adjustment range: approx. 60 mm
Screen tilt
Upward approx. 0 - 30°; downward approx. 0 - 5°
Screen swivel
Approx. 90° from left through right
Power supply
AC100 - 240 V, 50/60 Hz
Temperature of operating environment
5 - 35°C
Power consumption
53 W maximum, 4 W when in power-saving mode
Dimensions (W x D x H) (Units: mm)
Approx. 450 x 228 x 438 - 498
Weight
Approx. 9.8 kg
Display area only, approx. 6.2 kg

Specifications

Dimensions
]
- Analog signal cable: approx. 2.0 m
- Digital signal cable: approx. 2.0 m
- Analog signal cable, NL-C02E (purchased
separately): approx. 2.0 m
- 2-input cable, NL-C03J (purchased
separately): approx. 0.25 m
Note:
- As a part of our policy of continuous
improvement, SHARP reserves the right to make
design and specification changes for product
improvement without prior notice. The
performance specification figures indicated are
nominal values of production units. There may
be some deviations from these values in
individual units.
30
(Units: mm)
450
310
62
228