Specifications - Sharp LL-T1810A Mode D'emploi

Product specifications
LCD display
18.1 inches (46 cm measured diagonally)
Super-V and Anti Glare Low Reflection TFT LCD
module
Resolution (max.)
SXGA 1280 x 1024 pixels
Displayable colors (max.)
16.77 million colors (8 bit)
Dot pitch
0.2805(H) 0.2805(V) mm
Brightness (max.)
200cd/m 2
Contrast ratio
350:1
Angle of visibility
Left-right 150°; Up-down 150°
Screen display size
Horizontal 359 mm x Vertical 287.2 mm
Video signal
Analog RGB (0.7Vp-p) [75Ω]
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Frequencies
Refer to relevant signal timing (next page)
Automatic screen adjustment options
Clock, Phase, H-position, V-position
Expansion compensation
Digital screening (enlargement of display to
correct VGA/SVGA/XGA)
Plug & Play
VESA: DDC1/DDC2B compatible
Power management
VESA: based on DPMS
User adjustment options
Brightness, Contrast, Clock, Phase, screen
position (horizontal, vertical), screen colors
Computer signal input terminal
2 x 15 pin mini D-sub (3 rows)
USB hub function
1 upstream port, 2 downstream ports (bus-
powered hub based on USB standard Rev 1.1)
Screen tilt
Upward 0° -30°; downward 0° - 5°
Screen swivel
90° from left through right

Specifications

Power supply
AC100-240V (Use special AC adapter)
Temperature of operating environment
5 - 35°C
Power consumption
54W (4.5W when in power-saving mode)
Dimensions (W x D x H, excluding rubber base)
443 mm x 218 mm x 464 mm
Weight
Approx. 10.4 kg (excluding AC adapter)
Dimensions (Units: mm)
23