Dreve Polymax 1 Mode D'emploi page 24

Polymax 1, 1/120 °C, 3 and 5
14. Exchange of fuses
Disconnect the unit from mains sup-
ply. The fuse carrier is situated at the
rear of the unit, integrated in the mains
supply.
In order to control or exchange the
fuses push the push catch of the car-
rier, keep it pressed and remove the
carrier from the unit.
Pull the defective fuse out of the clamp
carrier applying slight traction and
replace it by a new, equivalent one.
Important: Only use the fuse
strength indicated on the rear.
46
After exchanging the fuse insert the
fuse carrier into the housing applying
slight pressure until the fixation latches
noticeably.
15. General notes
Repairs on the Polymax units may only · the unit is operated in accordance with
be executed by experts. Disconnect these working instructions.
the unit from mains supply at any rate. · extensions, new adjustments, changes
Dreve company is only responsible for or repairs are executed by persons
the safety, reliability and performance authorised by the company.
of the unit, if:
As we are currently developing our
· the unit is exclusively used for the cor- products, we reserve the right for tech-
responding field of application. nical changes.
· operation is only carried out by accord-
ingly trained personnel.
16. Guarantee
The guarantee time amounts to two Liability
years after the date of delivery. Guar- The right of the purchaser to bring
antee is only accepted in case of mate- actions arising out of defects shall in
rial or fabrication defects. The guaran- all cases be in lapse one year after the
tee obligation does not refer to natural date of delivery. The warranty obliga-
wear and tear or to damage occurring tion does not refer to natural wear
after the transfer of risk due to improper and tear or to damage occurring after
or unsuitable handling, excessive stress- the transfer of risk due to improper or
ing, unsuitable operating material, and unsuitable handling, excessive stress-
chemical, electrochemical or electrical ing, unsuitable operating material, and
influences of a nature not provided for chemical, electrochemical or electrical
according to the contract. On improper influences of a nature not provided for
alterations, repairs or maintenance or according to the contract. On improper
breach of seals carried out by the pur- alterations, repairs or maintenance or
chaser or third parties our warranty obli- breach of seals carried out by the pur-
gations and liability for consequences chaser or third parties our warranty obli-
caused thereby are rendered void. gations and liability for consequences
caused thereby are rendered void.
47