Dreve Polymax 1 Mode D'emploi page 18

Polymax 1, 1/120 °C, 3 and 5
3.3 Polymax 3
According to the EMC-guideline (2004/108/EEC) and the guideline for low tension
(2006/95/EEC).
We herewith declare that the machine described below is in its conception and design
and in the shape delivered by us in accordance with the fundamental requirement for
safety and health as prescribed in the applicable EEC-guidelines.
In case of any change or modification of the machine not authorised by us this decla-
ration becomes invalid.
Description of the machine: Polymax-3
D-3422/D-3422-A/D-34221/D-34221-A
Type of machine: Pressure polymerisation unit
Applicable EEC-guidelines:
2006/95/EEC Guideline for electrical appliances for low tension
2004/108/EEC Guideline for electromagnetic compatibility EMC
Applied harmonised standards:
EN 13732-1: 2006 Ergonomics of the thermal environment – Methods for the assess-
ment of human responses to contact with surfaces; part 1: Hot
surfaces (ISO 13732-1: 2006)
EN 61010 Part 1 Safety requirements for electrical equipment for measurement,
control and laboratory use; part 1: general requirements
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory
use – EMC requirements; part 1: General requirements (IEC
61326-1: 2005); emission according to living area, interference
resistance according to industrial area
Dreve Dentamid GmbH
Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-40 · Fax: +49 2303 8807-55
E-mail: info@dreve.de · www.dreve.com
34
3.4 Polymax 5
According to the EMC-guideline (2004/108/EEC) and the guideline for low tension
(2006/95/EEC).
We herewith declare that the machine described below is in its conception and design
and in the shape delivered by us in accordance with the fundamental requirement for
safety and health as prescribed in the applicable EEC-guidelines.
In case of any change or modification of the machine not authorised by us this decla-
ration becomes invalid.
Description of the machine: Polymax-5
D-3423/D-3423-A/D-34231/D-34231-A
Type of machine: Pressure polymerisation unit
Applicable EEC-guidelines:
2006/95/EEC Guideline for electrical appliances for low tension
2004/108/EEC Guideline for electromagnetic compatibility EMC
Applied harmonised standards:
EN 13732-1: 2006 Ergonomics of the thermal environment – Methods for the assess-
ment of human responses to contact with surfaces; part 1: Hot
surfaces (ISO 13732-1: 2006)
EN 61010 Part 1 Safety requirements for electrical equipment for measurement,
control and laboratory use; part 1: general requirements
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory
use – EMC requirements; part 1: General requirements (IEC
61326-1: 2005); emission according to living area, interference
resistance according to industrial area
Dreve Dentamid GmbH
Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-40 · Fax: +49 2303 8807-55
E-mail: info@dreve.de · www.dreve.com
35