Publicité
Les langues disponibles
Les langues disponibles
Putting on
Press on the switch (n°1 on picture).
Place the commutator (n°2 on picture) on one position according to the desired
power.
When the orange pilot light (n°3 on picture) turns off, the machine is ready to be
used.
Temperature setting
Set the temperature by positioning the commutator on the desired position.
Stopping the appliance
Place the commutator on 0.
Switch off the motor.
Let the device cool.
Disconnect the power cable.
Clean the appliance. (See 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Only use non-abrasive products, clean regularly the external walls of your device
with warm water and wash liquid: avoid the abrasive towelling. Rinse your device with
a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device shield-
ed from the humidity.
16
Publicité
