Publicité
Les langues disponibles
Les langues disponibles
5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Place the gyros grill on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible
materials even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the protective film from the top, the sides, the grid and the drawer
- To move forward the trolley, loosen the two sides screws.
- For GR 60 E and GR 80 E, when connecting to network, away of disconnection
must be planned in the fixed pipes as requested by the regulation.
b) First starting:
First cleaning
Clean the device and the accessories before the first use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged. If necessary, it must be
replaced by the producer, his after sale service or persons of similar skills to
avoid any risk.
- Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Switch I/0 (n°1 on picture)
Commutator
4
positions
Position 0
Position Mini
Position Max
(n° 2 on picture)
Orange pilot light (n°3 on
picture)
Function
Motor On/Off
Stop
Half power
Full power
Machine is on (pilot light on)
Machine is off (pilot light off)
15
Publicité
