Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk Advance SR 1500H B Manuel D'emploi Et D'entretien

USE AND MAINTENANCE MANUAL

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the Customer
with all necessary information to use the machine properly
in a safe and autonomous way. This includes information
about Technical characteristics, Operation, Machine
inactivity, Maintenance, Spare parts and Safety
conditions.
Before carrying out any procedure on the machine, the
Operators and Qualified technicians must read this
manual carefully. Contact the Manufacturer in case of
doubts regarding the interpretation of the instructions and
for any further information.

TARGET

This Manual is intended for the Operator and the
Technicians qualified for the machine maintenance.
The Operators must not carry out operations reserved for
qualified Technicians. The Manufacturer will not be
answerable for damages coming from the
non-observance of this prohibition.

HOW TO KEEP THIS MANUAL

The Use and Maintenance Manual must be kept near the
machine, inside an adequate case, far from liquids and
other substances that can cause damage to it.

CONFORMITY CERTIFICATE

Fig. A shows the documentation certifying the sweeper
accordance to the Law in force.

IDENTIFICATION DATA

The machine model and serial number are shown on the
plate (1, Fig C) attached to the chassis.
The machine model year is written in the EC statement
and it is also indicated by the first two figures of the
machine serial number.
This information is useful when requiring machine
replacement parts. Use the following table to write down
the machine identification data for any further reference.
MACHINE model .........................................................
MACHINE serial number .............................................
2

OTHER REFERENCE MANUALS

– Spare Part List, supplied with the machine.
– Service Manual that can be consulted at any
Nilfisk-Advance Service Centre.

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair
procedures must be carried out by qualified personnel or
by Nilfisk-Advance Service Centres (listed at the end of
this manual). Only original spare parts and accessories
must be used.
Call Nilfisk-Advance for service or to order spare parts and
accessories, specifying the machine model and serial
number.

CHANGES AND IMPROVEMENTS

Our Company constantly improves its products and
reserves the right to make changes and improvements at
its discretion without being obliged to apply such benefits
to the machines that were sold previously.
Any modifications and/or addition of accessory must be
approved and performed by the Manufacturer.

SAFETY

Read this chapter carefully before performing service
operations and during the first period of machine
utilization; take the necessary steps to protect people and
objects.
The following symbols indicate potentially dangerous
situations.
The machine Operator's cooperation is essential in order
to prevent injury. No accident prevention program is
effective without the total cooperation of the person
responsible for operating the machine. Most of the
accidents that may occur in a factory, while working or
moving around, are caused by failure to comply with the
simplest rules for exercising prudence. A careful and
prudent user is the best guarantee against accidents and
is the essential for successful completion of any
prevention program.
146 1633 000(3)2004-05 A