DENTAURUM Paramil 3 Mode D'emploi page 20

EN
Contents
1 Declaration of Conformity
2 Safety instructions
2.1 Approved use
2.2 Symbols indicating risk
2.3 Guarantee and liability
2.4 Obligations of authorised user
2.5 Obligations of personnel
2.6 General information for safe use of the machine
2.7 High risks
2.8 Packing
2.9 Delivery
2.10 Package contents
3 Function and description of the machine
3.1 Function
4 Installation
4.1 Positioning the machine
4.2 Connecting the machine to the power supply
4.3 Connecting the units to the machine
4.4 Connecting the compressed air supply
5 Setting up and operating the machine
5.1 Inserting the cutter and drill into the chuck
5.2 Adjusting the height of the support bar
5.3 Unlocking the swivel arm
5.4 Using the milling head
5.5 Setting the motor speed and changing the rotational direction
5.6 Using the model table
5.6.1 Locking and moving the model table pneumatically
5.6.2 Clamping the model on the model table
5.6.3 Using the extension adapter for the model table
5.7 Using the compressed air cooling
5.8 Adjusting the height of the milling motor
5.9 Using the halogen lamp
5.10 Changing the chuck
5.11 Mount for attachment - parallel holder
6 Maintenance
6.1 Cleaning the milling machine
6.2 Changing the halogen bulb
6.3 Changing the fuse
7 Troubleshooting
8 Spare parts
9 Circuit diagram
10 Technical data
20
20
21
21
21
21
22
22
22
22
23
23
23
24
24
24
24
25
25
25
27
27
27
28
28
28
28
28-29
29
29
29-30
30
30
30
30
31
31
31
31
32
32
33
33