Installation And Connection - Bartscher Panini Mode D'emploi

•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not move or tilt the device when in operation.
•
Never operate the device with wet or moist hands.
•
Never leave the device unattended when in operation.
WARNING! Risk of injury!
Never remove the casing and never modify the device yourself! Modifying the
device may lead to severe damage to persons and objects!
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!

5.2 Installation and connection

CAUTION!
The installation and maintenance of the device should only be carried out by
trained personnel!
•
Unpack the device and dispose of all packaging material.
•
Remove the protective film from the device. If any glue remains, remove it with an
appropriate solvent.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Never place the device on an inflammable surface (such as table cloth, carpet,
etc.) or in the vicinity of flammable materials.
•
Never place the device in humid or wet environment.
•
Do not place the device near open fireplaces, electric ovens, heating ovens or other
heat sources.
•
Leave at least 20 cm of free space around the device. Assure sufficient space for
the operating person in front of the device.
- 23 -