Safety Instructions For Maintenance; Possible Malfunctions - Bartscher Panini Mode D'emploi

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Problem
Grill plates do not get
warm although the device
has been turned on and
the red temperature
indicator light is on.
The device has been
turned on, the temperature
regulation knob has been
started, the red
temperature indicator light
is on, but it is not possible
to regulate temperature.
The red temperature
indicator light is not on,
although the device is
turned on and the process
of cooking goes in usual
way.
Cause
• Damaged temperature
controller.
• At least one of the heater
cables is defect.
•
The overheat protection
system is on.
• Damaged temperature
controller.
• Damaged heating
control light.
Solution
• Contact the retailer.
• Contact the retailer.
• Leave the grill to cool
down, push the RESET
button located at the
bottom of the device.
• Contact the retailer.
• Contact the retailer.
- 27 -