TFA 60.2558 Mode D'emploi page 16

TFA_No. 60.2558_Anleitung
Radio-controlled alarm clock
6.3 Alarm time setting
• Press the ALARM SET button in normal mode to enter the
alarm mode.
• 7:00 (default) or the last adjusted alarm time appear on the
display.
• Press and hold the ALARM SET button. The hour digits
flash.
• Press the + or – button to set the hours.
• Confirm the setting with the ALARM SET button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM SET button.
• To activate the alarm function press the ALARM ON/OFF
button.
• The display shows the alarm symbol and the adjusted
alarm time instead of the date.
• When the adjusted alarm time is reached, the alarm rings.
• Press any button (except SNOOZE/LIGHT) and the alarm
will stop.
30
26.09.2019 17:34 Uhr Seite 16
Radio-controlled alarm clock
• If the alarm is not stopped manually, the alarm sound auto-
matically turns off after 3 minutes and will be reactivated
24 hours later.
• When the alarm rings, press the SNOOZE/LIGHT button and
the snooze function is activated. Zz flashes on the display.
• The alarm will be interrupted for 5 minutes.
• The snooze function can be activated up to seven times.
• Press the ALARM ON/OFF button to deactivate the alarm
function. The actual date will appear again.
7. Light
• Press the SNOOZE/LIGHT button.
• The backlight turns on for 5 seconds.
8. Lock function
• Slide the switch to LOCK ON
• Slide the switch to the position LOCK OFF
tion is deactivated.
and all buttons are locked.
and the func-
31