TFA 60.2558 Mode D'emploi page 15

TFA_No. 60.2558_Anleitung
Radio-controlled alarm clock
• Press the + or – button if you want to deactivate the DCF
reception (RCC OFF).
• Once the DCF time reception is deactivated the clock and
date must be manually set. No time zone will appear.
• Confirm the setting with the TIME SET button.
• The setting sequence is shown as follows: the time zone
(00 - default), the 12 or 24 hours system (24hr - default),
the hours, the minutes, the seconds, the year, the language
of the day-of-the-week (GERMAN - default), the day/month
(European version - default) or month/day sequence
(American version), the month and the day. Adjust the set-
tings with the + or – button.
• Confirm the settings with the TIME SET button.
• If the DCF reception is activated (RCC auto), the manually
set time will be overwritten by the DCF time when the sig-
nal is received successfully.
6.1.1 Time zone setting
• You can make the time zone correction (+12/-12) in setting
mode.
28
26.09.2019 17:34 Uhr Seite 15
Radio-controlled alarm clock
• The time zone correction is needed for countries where the
DCF signal can be received but the time zone is different
from the DCF time (e.g. +1=one hour plus).
6.1.2 12 or 24 hour system
• In setting mode you can choose between the 12 - or 24
hours system. In the 12 Hr system AM or PM (after 12
o'clock) appears on the display.
6.1.3 Day-of-the week language
• In the setting mode you can set the day-of-the week lan-
guage: GERMAN, FRENCH, ITALIAN, SPANISH, DANISH,
DUTCH, CZECH, POLISH, SWEDISH and ENGLISH.
6.2 Temperature unit setting
• Press the + button in normal mode to change between °C
(Celsius) or °F (Fahrenheit) as temperature units.
29