Lindy 39102 Manuel D'utilisateur page 2

English Manual
Installation
• Use the supplied DisplayPort, USB and Audio cables to connect your computers and the
KVM Switch
• Connect your display, audio devices, keyboard and mouse to the KVM Switch. Do not
connect any peripheral USB devices yet.
"Console" port
• Connect the power supply to the KVM Switch and turn on your display for the handshake
process to begin.
• Turn on your computers
• Connect peripheral USB devices to the "Device" ports as required
Note: To use a VGA or DVI monitor with the KVM switch use LINDY DisplayPort to VGA
Adapter (LINDY 41017) or LINDY DisplayPort to DVI Adapter (LINDY 41019). Simply connect
the adapter to the 'Console' port and connect the adapter to your monitor using the appropriate
cable.
Switching Operation
There are two methods for controlling your KVM Switch for computer and Audio/Mic channel
selection, using either the front button or using HotKey sequences.
Front panel button
The front button gives you direct control over the KVM switching operation. Simply press the
button to switch to the corresponding computer port.
Audio/Mic port switching are bound together, unless you specify the audio to be fixed to a
specific port.
User HotKey Sequence
HotKey Sequences give you a greater degree of control over switching functions. You will need
a keyboard with Caps Lock (CapsLock) to perform this option.
If you are using a Mac with a keyboard without Caps Lock you can remap your Keyboard
Shortcuts using the Keyboard & Mouse Preferences panel in System Preferences by un-
checking the Display HotKey options.
See the following page for HotKey Sequences.
Your display should be connected to the
By default, PC port switching and
English Manual
HotKey Sequences
Command HotKeys
Select PC Port
Caps Lock + Caps Lock + (x)
Jointly select PC port/ hub port control /
x = 1~2 for PC port number
Audio & Mic, if binding is enabled
Caps Lock + Caps Lock + (Fx)
Select Hub Port Control
Fx = F1~F2
Jointly select PC & Hub port control, if
binding is enabled (Fx is a function key)
x = 1~2 for PC port number
Caps Lock + Caps Lock + (Fy)
Select Audio & Mic Port
Fy = F5~F6
Jointly select PC port and Audio & Mic,
(Fy is a function key)
if binding is enabled
y = 1~2 for audio/Mic port no
Bound PC & Hub Port Control Switching
Default - Once enabled, any PC and/or
Caps Lock + Caps Lock + Z
hub port control switch is bound
together
Unbind PC & Hub Port Control Switching Caps Lock + Caps Lock + X
Bound PC & Audio & Mic Switching
Default - Once enabled, any pc and/or Caps Lock + Caps Lock + Q
Audio & Mic switch is bound together
Unbind PC & Audio & Mic Switching Caps Lock + Caps Lock + W
Previous PC port
Caps Lock + Caps Lock +
Jointly selects PC /hub port control, if
(arrow up)
binding is enabled
Next PC port
Caps Lock + Caps Lock +
Jointly select PC /hub port control, if
arrow down)
binding is enabled
Caps Lock + Caps Lock + 
Previous PC port
(Backspace)
Caps Lock + Caps Lock + H + (y)
Define HotKey Preceding Sequence y = SCROLL LOCK, CAPS, ESC,
F12 or NUM LOCK
AutoScan
Caps Lock + Caps Lock + S
5 sec scan Delay Time
Caps Lock + Caps Lock + S +
AutoScan
(z)
with Programmable Delay Time
Multiple z = 10 ~ 100
Stop AutoScan Press any key on keyboard
Description
Select the active PC port
Select the PC port that control all USB hub ports
Select the active Audio & Mic port
Enable the binding of PC port and hub port
control switching.
Disable the binding of PC port and hub port
control switching
Enable the binding of PC port and Audio & Mic
switching.
Disable the binding of PC port and Audio & Mic
switching
Select the previous connected PC port
Select the next connected PC port
(Jointly select PC/hub port control, if binding is
enabled)
Toggle between the previous port and current
port
Select the HotKey preceding sequence among 5
alternative keys
AutoScan through every connected port for
quick screen browsing of each port
AutoScan with a user-defined delay time within a
range of 10 ~ 100 seconds
Terminate AutoScan activity