Unpacking And Assembly - GGP ITALY 92 Manuel D'utilisation

3. UNPACKING AND ASSEMBLY

For storage and transport purposes, some components of the
machine are not installed in the factory and have to be assem-
bled after unpacking. Follow the instructions below.
IMPORTANT
The machine is supplied without engine
oil or fuel. Before starting the engine, fill with oil and fuel fol-
lowing the instructions given in the engine manual.
WARNING!
Unpacking and completing the
assembly should be done on a flat and stable surface,
with enough space for machine handling and its packag-
ing, always making use of suitable equipment.
3.1 UNPACKING
When unpacking the machine, take care to gather all individual
parts and fittings, and do not damage the cutting deck when tak-
ing the machine off the pallet.
The packaging contains:
– the machine;
– the steering wheel;
– the seat;
– the front bumper (if provided);
– the battery;
– the grass-catcher (with instructions);
– an envelope containing:
– the instruction manuals and documents,
– nuts and bolts including a pin for locking the steering
wheel,
– starter keys and a spare 10A fuse.
NOTE
To prevent damage to the cutting deck,
raise it to its maximum height and take utmost care when tak-
ing the machine off the pallet.
Hydrostatic transmission
To make it easier to move or take the machine off the pallet,
put the transmission disengagement lever in position «B»
( 4.33).
Disposal of the packaging should be done in accordance with
the local regulations in force.
3.2 FITTING THE STEERING WHEEL
Put the machine on a
flat surface and
straighten up the front
wheels.
Fit the steering wheel
(1) onto the protruding
shaft (2) with the
spokes directed
towards the seat.
Line up the hole on the
steering wheel hub
with the hole on the
1
2
3
EN 9