Preparing To Mount The Range Hood - Faber INCA IN-LIGHT INLT21SSV Instructions D'installation, D'utilisation Et D'entretien

PREPARING TO MOUNT THE RANGE HOOD

Attach the brackets with two screws as shown in the
I
B
3
center of the cut out on each side. The edge of the bracket
should align with the cut out edge.
If you are installing a Self supporting liner (#LINSPT301228 or
#LINSPT361228), brackets need to be attached directly to the
bottom lip of the metal liner.
=
=
I
4x
B
2x
13