Assembly; Operation - Derungs D VISIANO 10-1 P S10 Mode D'emploi

ENG
3

ASSEMBLY

Workload data
Bending moment M
B
Vertical weight F
G
2
3

Hook rail clamp (1) on the DIN rail (2) and tighten with a
hand screw (3).

Insert 16 mm pin (4) and secure it with the plastic screw
(5).
DANGER
Danger to life through electric shock

The power cable (black) must always lead from the
top of the light arm (as shown in the image above).

All poles of the luminaire must be separated by an
external switch from the power (not included in the
delivery).
DANGER
Danger to life through electric shock

All poles of the voltage supply at the power connec-
tion must be secured via an overcurrent release (ac-
cording to national assembly regulations) (not in-
cluded in the delivery).
4

OPERATION

WARNING
Warning against damage to eyes

Never look directly into the beam of light.
DANGER
Danger to life through electric shock

Do not plug in any damaged power cables.

If there are any signs of damage to the power
cable, immediately replace it with a new one.

Connection voltage and frequency must match
data on the type plate.
12
15 Nm
32 N
4
1
5

The 180° position (parking position) is not permit-
ted.

A sharp bend of approx. 90° at the connecting piece
is not permitted.

Example for a correct parking position
►
Plug in cable

Before each use: Perform a function test: all LEDs in the
light cone must come on.

Turn luminaire on/off